900MM Knife-Moving Type PCB Splitting Machine Aluminum PCB Cutting Machine
Intro:
YS-805C is a PCB Depaneling Machine for pcbs with v-cut, cut both small and large PCBs fast and economicaly. To optimize operation,the separation length can be programmed.
The PCB is placed with its pre-scored groove onto the linear blade,when the foot swith is pressed,the blade carrier with the circular blade moves across the PCB,separating it into individual units.
Suitable:
- Suitable for pcb, aluminum pcb, fiber panel with V-cut
- Available PCB thickness: from 0.2mm to 3.2 mm
- Available V-cut thickness: from 0.2mm to 2.0mm
Parameter
| Model | YS-805C |
| Model Blade Motion | Upper Circular Blade Moving Automatically |
| Cutting path | 900mm |
| cutting thickness | 0.5mm-3.2mm |
| cutting length | 0-900mm |
| Cutting speed | 300mm/sec or 500mm/sec |
| Upper circular blade | diameter 125mm,cutting point angle 26-28' |
| Lower blade | 900MM |
| Drive mode | Micro stepping motor + precise linear guaidway |
| Voltage | 220v/110v,50/60hz,250w |
| Warranty | Three years for the pc board One year for unit machine |
| Weight | 80kg |
| Size | 1200x550x460CM |
Features:
1,Microcomputer program control,precise positioning and good stability.
2,Blade moving speed is adjustable,500mm/s or 300mm/s. Speed can also be increased by modifying program.
3,Can fine adjust cutter wheel:0-2mm, to apply to PCB boards of different thickness and V-CUT of different depth. Can adjust height of operation desk:0-50mm.
4,Depth of black baffle is adjustable:0-150mm. Max cutting length is 1300mm. Max cutting thickness is 0.2-3.2mm,Max depth of V-CUT is 0.2-2.0mm.
5,Blade moving path,moving point and stopping point can be set according to length of PCB board.
6,Upper and lower blades are made of imported high- speed steel, long service life and can be sharpened for 7-10 times.
Dudrable blade , can be grineded.
|
|
YS-805C 900MM Knife-Moving Type PCB Splitting Machine Aluminum PCB Cutting Machine Images
|
