Programmable Epoxy And Hardner Two Components Adhesive Mixing And Potting Machine
Intro:
YS-D331E is an Automatic Two Parts Liquid Glue Potting Filling Machine works for AB two-component glue. It uses precise gear metering pump or screw pump to measure, extract and mix according to the specified ratio.
An automatic machine that drips, coats, and pots liquid on the surface or inside of the product to make it a device for sealing, fixing, and waterproofing.
Suitable:
- Two components AB glue
- 3- axis glue dispensing movement
- Can make point, line, surface, arc, circle, irregular curve continuous complement and triaxial linkage,etc
- Working platform be customized accroding to customer's product size
- Programmable, LCD touch panel to set glue quantity, speed, etc
Technical Parameters:
| Mixing ratio | 1: 1-1: 10 Adjustable |
| Glue filling speed | 0.5-15 g adjustable (according to glue characteristics) |
| Glue filling accuracy | Glue amount ±2% Proportion: ±2% |
| 3 axis working area | XYZ 300x300x100MM (can be customized), 400x400x100mm, 500x500x100mm, 250(X)x400(Y)x100(Z)MM |
| Glue viscosity | <=2000CPS |
| Operation mode | Manual Or automatic |
| Glue ratio mixing | Pump measurement |
| Programming method | Teaching programming |
| Mixing system | static/dynamic mixing |
| A pump | gear pump/screw pump |
| B pump | gear pump/screw pump |
| Pressure tank | 10L, 20L, 30L optional |
| A B plastic bucket mixing | Optional |
| A B plastic barrel heating | Optional |
| Defoaming function | Optional |
| Washing bucket capacity | 5L |
| Power voltage | 220V/110V 50HZ/60HZ |
Features:
1. 5. 7-inch touch screen operation, can be equipped with computer operating software, can draw CAD pictures, can be operated by a single machine, easy to learn and understand;
2. It has the functions of continuous interpolation of points, lines, surfaces, arcs, circles, irregular curves, and three-axis linkage, which can adapt to any irregular object filling;
3. The hard disk has a large storage memory capacity, unlimited storage of programs, no need to reprogram, and the software has functions such as area array, translation and rotation calculation;
4. The glue volume, glue speed, glue dispensing time, and glue stop time can all be parameterized, the glue output is stable, and glue is not leaked;
5. The three functions of glue dispensing, glue filling and track potting are integrated and fully automated;
6. Proportioning according to needs, realizing glue filling while mixing, saving glue to the greatest extent;
7. Glue A and Glue B are stored separately to ensure that the glue does not solidify after being placed for a long time;
8. Dynamic or static mixing can be used, mixing uniformly and fully;
10. Unique control system, not affected by air pressure, avoiding uneven glue output, wire drawing, bubbles, etc.;
11. The Z-axis height adjustment device can adapt to the work of different heights;
1 3. Optional glue mixing, heating and reserved vacuum defoaming function, suitable for different types of infusion processes
How are two components adhesive mixed?
Glue A and glue B are placed in two different stainless steel pressure barrels, and two pumps are connected to get glue from the two barrels according to the set ratio. After the glue is extracted, it is sent to the mixing valve through two independent pipes. The mixing valve is connected to a mixing tube, and there is an electric stirring rod inside the mixing tube. The motor will drive the mixing pump to rotate continuously. After the two glues are fully mixed in the mixing tube, they are poured onto the product.
Machine video:
|
|
Programmable Epoxy And Hardner Two Components Adhesive Mixing And Potting Machine Images
|
